Monday, August 31, 2009

Short flight sim video

It's been one year since we released the first videos from Outerra engine. So it's about time to release another short one featuring a lifeless Jalapeno and a pilotless Cessna plane with broken propeller

Monday, August 17, 2009

Flight sim?

Two guys I'm working with on the engine, Laco 'angrypig' Hrabcak and Tomas 'jonsky' Mihalovic have some time ago worked on FNPT II MCC trainer with Boeing 737-800 cockpit replica (Laco has got some photos in his history page)
They are still being quite drawn to simulators, so when we got positive reception from flight sim community with the engine we decided to lean the development slightly more that way.

Recently, Laco got preliminary Collada loader working, loading a Cessna model. He is also incorporating JSBSim Flight Dynamics Model library into the engine, while Tomas works on the cockpit.

Here are some first screens.

Here are some screens with (now featureless) cockpit, recent Z-buffer development allows to handle the cockpit and terrain without problems.

A look below while grounded.

And some screens from outside.

Wednesday, August 12, 2009

Logarithmic Depth Buffer

I assume pretty much every 3D programmer runs into Z-buffer issues sooner or later. Especially when doing planetary rendering; the distant stuff can be a thousand kilometers away but you still would like to see fine details right in front of the camera.

Previously I have dealt with the problem by splitting the depth range in two and using the first part for near stuff and another for distant stuff. The boundary was floating, somewhere around 5km - quad-tree tiles up to certain level were using the distant part, and the more detailed tiles that by law of LOD are occurring nearer the camera used the other part.
Most of the time this worked. But in one case it failed miserably - when a more detailed tile appeared behind a less detailed one.
I was thinking about the ways to fix it, grumbling why we can't have a Z-buffer with better distribution, when it occurred to me that maybe we can.

Steve Baker's document explains common problems with Z-buffer. In short, the depth values are proportional to the reciprocal of Z. This gives amounts of precision near the camera but little off in the distance. Common method is then to move your near clip plane further away, which helps but also brings its own problems, mainly that .. the near clip plane is too far.

A much better Z-value distribution is a logarithmic one. It also plays nicely with LOD used in large scale terrain rendering.
Using the following equation to modify depth value after it's been transformed by the projection matrix:

    z = log(C*w + 1) / log(C*Far + 1) * w      //DirectX with depth range 0..1

    z = (2*log(C*w + 1) / log(C*Far + 1) - 1) * w   //OpenGL, depth range -1..1
Note: you can use the value of w after your vertices are transformed by your model view projection matrix, since the w component ends up with the view space depth. Hence w is used in the equations above.

Update: Logarithmic depth buffer optimizations & fixes

Where C is constant that determines the resolution near the camera, and the multiplication by w undoes in advance the implicit division by w later in the pipeline.
Resolution at distance x, for given C and n bits of Z-buffer resolution can be computed as

    Res = log(C*Far + 1) / ((2^n - 1) * C/(C*x+1))

So for example for a far plane at 10,000 km and 24-bit Z-buffer this gives the following resolutions:
            1m      10m     100m    1km     10km    100km   1Mm     10Mm
C=1         1.9e-6  1.1e-5  9.7e-5  0.001   0.01    0.096   0.96    9.6     [m]
C=0.001     0.0005  0.0005  0.0006  0.001   0.006   0.055   0.549   5.49    [m]

Along with the better utilization of z-value space it also (almost) gets us rid of the near clip plane.

And here comes the result.

Looking into the nose while keeping eye on distant mountains ..

10 thousand kilometers, no near Z clipping and no Z-fighting! HOORAY!

More details

The C basically changes the resolution near the camera; I used C=1 for the screenshots, having theoretical resolution 1.9e-6m. However, the resolution near the camera cannot be utilized fully as long as the geometry isn't finely tessellated too, because the depth is interpolated linearly and not logarithmically. On models such as the guy on the screenshots it is perfectly fine to put camera on his nose, but with models with long stripes with vertices few meters apart the bugs from the interpolation can be visible. We will be dealing with it by requiring certain minimum tessellation.

Fragment shader interpolation fix

Ysaneya suggested a fix for the artifacts occurring with thin or large triangles when close to the camera, when perspectively interpolated depth values diverge too much from the logarithmic values, by writing the correct Z-value at the pixel shader level. This disables fast-Z mode but he found the performance hit to be negligible.

Update: a more complete and updated info about the logarithmic depth buffer and the reverse floating point buffer can be found in post Maximizing Depth Buffer Range and Precision.